Page Title

TOOL REQUIREMENTS

** Apprentice Level Tool Requirements

1. Screwdrivers (Straight & Phillips)

2. Pliers

3. Crescent wrench

4. 35 foot steel tape

5. Utility knife

6. Staple Gun ( JT 21 )

7. Allen Wrenches (standard & metric)

* All of the above items as well as those listed below are required for Craftsman status. Part of our job is being prepared for the

un-expected. A lot of our people carry this and more.

Star wrenches
Top cutter push knife
Battery operated Screw gun with tip assortment (12 Volt or more)
Hammer
Wire cutters
Hacksaw
Cam Lock wrench
Pipe wrench or channel locks
35 ft. tape measure
miscellaneous supplies (tape, wire ties, staples, knife blades, etc.)

Dress Code

The Employer has the right to reject or discharge any employee who fails to meet a dress code consisting of the following

guidelines:

Employees shall report to work wearing clean and neat garments, free of holes and patches.. Clothing must pose no safety problems. Garments with obscene writing, symbols, or signs are not

acceptable. Workout pants (spandex) leotards, tights, sleeveless shirts are not acceptable. Long pants or knee-length walking shorts (no over sized) during set-up and tear down are permitted. Shorts are not permitted during the opening of the show. Shoes must cover the foot, and be

appropriate for working long periods, kicking carpet and climbing ladders.